|
|
|
|
| Boost Gauge Installation (Universal)
The boost gauge plumbing is installed somewhere between the compressor outlet of the turbo and the intake manifold. A hole is drilled through the firewall and deburred so that the pressure tube can then be routed to the gauge. Several layers of electrical tape or a grommet may be installed to prevent damage to the tube by the firewall. The tube is then routed to the back of the gauge and mounted to the fitting on the gauge. Extreme care should be made in routing and connecting the tube so that no kinks are experienced. The gauge light is then wired into the existing instrument light switch (12VDC) using 18 AWG or larger wire (not supplied with gauge/tubing kit)
|
|
|
|||
|
|
