|
|
|
|
| Boost Gauge Installation Dodge Cummins Turbo Diesel 1991-1998 12 Valve (Intercooled) 1. Locate and remove the 1/8" NPT pipe plug (see pic below) on the drivers side of the intake manifold. 2. Install the fitting and connect the hose making sure that the hose fits snug but does not pinch.
The
easiest way to install a boost gauge on a 24V Dodge is to first
aquire a 3/4" NPT to 1/8" NPT reducer fitting. next
locate the 3/4" NPT pipe plug in the intake manifold. The
best one of these to use is located on the back of the engine
between the fuel filter and the firewall. The 3/4" NPT plug
has a 1/2" square in the center of it and can be removed
easily with a 1/2" drive ratchet and extention. Replace the
3/4" NPT factory plug with the reducer plug and the fittings
that come with the boost gauge tubing kit will now fit and allow
the tubing to be ran from the intake manifold to the boost gauge. |
|
|
|||
|
|
